Skip to content
AtlasAnalyzer

Blog November 20, 2026

How to find out who is using your internet bandwidth

The link saturates and the complaints arrive before the chart does. How to find the machine, the person and the application using the bandwidth, with SNMP and firewall logs.

First, confirm the link is saturated

Before looking for a culprit, check whether the link really hits its limit. The WAN interface counters, read over SNMP, show inbound and outbound traffic minute by minute. If the curve touches the contracted speed when the complaints come in, the problem is usage; if it stays far below, check the link's packet loss and latency before looking at who uses it.

The firewall log tells you who

Every connection through the firewall becomes a log line with the source, destination, application and bytes transferred. Adding those lines up by source shows the machine that used the most in the period.

To see the person's name instead of the IP, the firewall needs to identify users: through Active Directory integration, an agent on the workstations or a login portal. Without it, the log only has the address, and you match the IP against DHCP to find the machine.

Then, the application and the destination

Knowing who solves half the problem. The other half is what. The firewall's application control classifies the traffic, and the usual suspects are the same:

  • Video and music streaming during working hours.
  • System updates downloaded by every machine at the same time.
  • Cloud backup and file sync running at peak time.
  • A compromised machine sending data out.

Compare with the previous period and check the time

High usage is only a problem if it changed. Compare the week with the previous one: what grew, what is new and what showed up for the first time. A heat map by day of the week and hour shows whether the peak is always at the same time, which usually points to a scheduled task.

What to do with the answer

With who, what and when in hand, the options are well known:

  • Limit bandwidth for categories such as streaming, with a QoS rule on the firewall.
  • Move updates and backups outside working hours.
  • Block the category that has no business use.
  • Investigate the machine sending data to an unknown destination.
  • Review the link speed, if the usage is legitimate and has grown.

Have it ready, without digging through logs

AtlasAnalyzer receives the firewall logs via syslog and shows bandwidth per user, application, destination and interface, compared with the previous period, with the heat map by day and hour and a report for each person. It works with FortiGate, Sophos, SonicWall, pfSense and MikroTik in the same console, and link health comes from SNMP and ping.

Ready to see your whole environment in one console?

In a 30-minute demo, our team shows you AtlasAnalyzer with sample data from the sources you use.